Wood Spline For Hardwood Floors

Wood splines are thin, rectangular pieces of wood that are used to join two pieces of hardwood flooring together. They are typically made from the same type of wood as the flooring, and they are inserted into a groove that is cut into the edge of each piece of flooring. Wood splines help to keep the flooring in place and prevent it from buckling or warping.

There are two main types of wood splines: tongue-and-groove splines and biscuit splines. Tongue-and-groove splines have a tongue on one end and a groove on the other. The tongue fits into the groove of the adjacent piece of flooring, and the spline is then secured in place with glue or nails. Biscuit splines are round or oval-shaped, and they are inserted into a hole that is drilled into the edge of each piece of flooring. The spline is then secured in place with glue or nails.

Wood splines are a relatively simple and inexpensive way to join hardwood flooring together. They are easy to install, and they can be used with any type of hardwood flooring. However, it is important to note that wood splines are not as strong as other methods of joining hardwood flooring, such as nails or screws. Therefore, they are not recommended for use in areas where the flooring is likely to be subjected to heavy traffic or wear.

How to Install Wood Spline For Hardwood Floors

Installing wood splines is a relatively simple process. The following steps will show you how to install wood splines for hardwood floors:

Cut a groove into the edge of each piece of hardwood flooring. The groove should be deep enough to accommodate the wood spline.
Apply glue to the groove and insert the wood spline. Be sure to insert the spline all the way into the groove.
Secure the spline in place with glue or nails. If you are using glue, be sure to clamp the flooring together until the glue dries.

Once the wood splines are installed, the hardwood flooring can be sanded and finished.