How To Reseal A Wood Floor

Resealing a wood floor is a relatively easy DIY project that can be completed in a few hours. By following these simple steps, you can protect your wood floor from wear and tear and keep it looking its best for years to come.

1. Gather your materials

Before you begin, you will need to gather the following materials:

Wood floor cleaner
Sandpaper (120-grit and 220-grit)
Tack cloth
Wood floor sealer
Foam brush or applicator
Clean rags

2. Clean the floor

The first step is to clean the floor thoroughly. This will remove any dirt, dust, or debris that could interfere with the adhesion of the sealer.

To clean the floor, use a wood floor cleaner and follow the manufacturer's instructions. Be sure to rinse the floor thoroughly with clean water after cleaning.

3. Sand the floor lightly

Once the floor is clean, sand it lightly with 120-grit sandpaper. This will help to smooth out any imperfections in the floor and create a better surface for the sealer to adhere to.

Be sure to sand in the direction of the wood grain. Once you have sanded the entire floor, vacuum up the dust.

4. Tack the floor

After sanding the floor, tack it with a tack cloth. This will remove any remaining dust or debris from the floor.

5. Apply the sealer

Now it's time to apply the sealer. Use a foam brush or applicator to apply a thin, even coat of sealer to the floor.

Be sure to follow the manufacturer's instructions for applying the sealer. Some sealers may require multiple coats. Allow each coat to dry completely before applying the next coat.

6. Buff the floor

Once the sealer has dried completely, buff the floor with a clean rag. This will help to remove any excess sealer and give the floor a smooth, even finish.