How To Repair Gouges In Wood Floor

Gouges in wood floors can be unsightly and a safety hazard. They can also allow dirt and moisture to penetrate the wood, causing further damage. Fortunately, repairing gouges in wood floors is a relatively simple process that can be done with a few basic tools and materials.

To repair a gouge in a wood floor, you will need the following:

Wood filler
Putty knife
Sandpaper
Tack cloth
Polyurethane (optional)

First, clean the gouge with a damp cloth to remove any dirt or debris. Then, apply a small amount of wood filler to the gouge using a putty knife. Be sure to fill the gouge completely, but do not overfill it.

Once the wood filler has been applied, allow it to dry for the amount of time specified on the product label. Once the wood filler is dry, sand it smooth using fine-grit sandpaper. Be sure to sand in the direction of the wood grain to avoid damaging the floor.

Once the gouge has been sanded smooth, wipe it down with a tack cloth to remove any dust or debris. Then, apply a coat of polyurethane to the gouge (optional). Polyurethane will help to protect the wood filler and prevent it from being damaged.

Once the polyurethane has been applied, allow it to dry for the amount of time specified on the product label. Your wood floor is now repaired and protected!

Tips

If the gouge is deep, you may need to apply multiple coats of wood filler. Allow each coat to dry completely before sanding.
If the gouge is located in a high-traffic area, you may want to apply a second coat of polyurethane for added protection.
You can also use a wood stain to match the color of the wood filler to the surrounding floor.