How To Level A Wood Floor

If you're planning to install new flooring, it's important to make sure the subfloor is level. An uneven subfloor can cause the new flooring to buckle, crack, or warp. Leveling a wood floor is a relatively simple process that can be completed in a few hours.

To level a wood floor, you will need the following tools and materials:

A level
A straight edge
A circular saw
A jigsaw
A hammer
Nails
Shims
Wood filler

Once you have gathered your tools and materials, you can begin leveling the floor. The first step is to find the highest point on the floor. To do this, place the level on the floor in several different locations. The highest point will be the point where the level is closest to being level.

Once you have found the highest point on the floor, you can begin cutting the shims. Shims are thin pieces of wood that are used to level a floor. To cut the shims, use a circular saw to cut them into strips that are about 1 inch wide and 4 inches long. You will need to cut enough shims to cover the entire floor.

Once you have cut the shims, you can begin installing them. To install the shims, place them under the floorboards in the areas that are uneven. Use a hammer to tap the shims into place. Make sure that the shims are level with the floorboards.

Once you have installed the shims, you can begin nailing down the floorboards. To nail down the floorboards, use a hammer and nails. Drive the nails into the floorboards at an angle. Make sure that the nails are flush with the surface of the floorboards.

Once you have nailed down the floorboards, you can begin filling in the nail holes. To fill in the nail holes, use wood filler. Apply the wood filler to the nail holes using a putty knife. Allow the wood filler to dry completely.

Once the wood filler has dried, you can begin sanding the floor. To sand the floor, use a sander. Sand the floor until it is smooth and level. Once you have sanded the floor, you can begin applying a finish. To apply a finish, use a brush or roller. Apply the finish in thin, even coats. Allow the finish to dry completely.

Leveling a wood floor is a relatively simple process that can be completed in a few hours. By following the steps outlined in this article, you can level your wood floor and ensure that your new flooring is installed properly.