How To Cut Vinyl Wood Plank Flooring

Luxury vinyl plank flooring (LVP) is a popular choice for homeowners because it is durable, easy to clean, and relatively easy to install. However, one of the most challenging aspects of installing vinyl plank flooring is cutting it. If you are not careful, you can easily damage the planks or make them difficult to fit together.

In this article, we will provide you with step-by-step instructions on how to cut vinyl wood plank flooring. We will also provide you with some tips on how to avoid common mistakes.

Materials you will need:

* Vinyl wood plank flooring * Measuring tape * Pencil or chalk * Utility knife or flooring knife * T-square or framing square * Straight edge * Safety glasses

Instructions:

Measure the area where you want to install the flooring. Use a measuring tape to determine the length and width of the area. Add 1 inch to each measurement to allow for overlap.
Mark the location of the cuts on the planks. Use a pencil or chalk to mark the location of the cuts on the planks. Be sure to measure carefully and make sure that the cuts are square.
Score the planks along the cut lines. Use a utility knife or flooring knife to score the planks along the cut lines. Be sure to score deeply enough to cut through the top layer of the plank, but not so deeply that you cut through the back of the plank.
Snap the planks apart. Once the planks are scored, you can snap them apart by bending them along the score line. Be careful not to bend the planks too far, or you could damage them.
Finish the cut. If the cut is not clean, you can use a utility knife or flooring knife to finish the cut. Be sure to use a sharp blade and cut carefully.
Test the fit. Before you install the planks, test the fit by placing them together on the floor. Make sure that the cuts are square and that the planks fit together snugly.
Install the planks. Once you are satisfied with the fit, you can install the planks according to the manufacturer's instructions.

Tips:

* Always wear safety glasses when cutting vinyl wood plank flooring. * Use a sharp blade to cut the planks. A dull blade will make it more difficult to cut the planks cleanly and could damage them. * Score the planks deeply enough to cut through the top layer of the plank, but not so deeply that you cut through the back of the plank. * Bend the planks along the score line to snap them apart. Do not bend the planks too far, or you could damage them. * Test the fit of the planks before you install them. This will help you to avoid mistakes and ensure that the planks fit together properly.