Filling In Cracks In Wood Floors

A cracked wood floor can be an eyesore, but it can also be a hazard. If the crack is deep enough, it can cause people to trip and fall. In addition, cracks can allow dirt and moisture to seep into the wood, which can lead to further damage. Fortunately, filling in cracks in wood floors is a relatively easy and inexpensive repair that can be done by do-it-yourselfers.

### Tools And Materials You Will Need:

The first step is to clean the crack. Use a vacuum cleaner to remove any loose dirt or debris. Then, wipe the crack with a damp cloth to remove any remaining dust or grime.

Once the crack is clean, you can start filling it in. There are a few different types of wood fillers that you can use, but the most common type is a pre-mixed wood filler. Wood fillers are available in a variety of colors, so you can choose one that matches the color of your floor. To apply the wood filler, simply use a putty knife to spread it into the crack. Be sure to fill the crack completely and smooth the surface of the filler.

After the wood filler has dried, you can sand it smooth. Use a fine-grit sandpaper to avoid scratching the surface of the floor. Once the filler is sanded smooth, you can apply a clear finish to protect it.

### If The Crack Is Deep

If the crack is very deep, you may need to use a different method to fill it in. One option is to use a wood dowel. To use a wood dowel, first drill a hole that is the same diameter as the dowel into the crack. Then, cut a dowel to the length of the crack and insert it into the hole. Be sure to tap the dowel into place until it is flush with the surface of the floor.

Once the dowel is in place, you can cut off any excess dowel with a sharp knife. Then, sand the dowel smooth and apply a clear finish to protect it.

### Another Option For Filling Deep Cracks

Another option for filling deep cracks is to use a two-part epoxy. Epoxies are very strong and durable, and they can be used to fill in even the deepest cracks. To use an epoxy, simply mix the two parts together according to the manufacturer's instructions. Then, apply the epoxy to the crack and smooth it out with a putty knife.

Once the epoxy has cured, you can sand it smooth and apply a clear finish to protect it.

### Tips For Filling In Cracks In Wood Floors

Here are a few tips for filling in cracks in wood floors: