How To Replace Wood Floor Planks

How to Replace Wood Floor Planks

Replacing wood floor planks can be a daunting task, but it's actually quite simple if you have the right tools and materials. Here's a step-by-step guide on how to do it:

Step 1: Remove the Damaged Planks

The first step is to remove the damaged planks. To do this, use a pry bar to loosen the planks from the subfloor. Be careful not to damage the subfloor when doing this.

Step 2: Cut the New Planks to Size

Once the damaged planks are removed, you need to cut the new planks to size. Measure the length of the damaged planks and cut the new planks to the same length. You can use a miter saw or a circular saw to cut the planks.

Step 3: Install the New Planks

Once the new planks are cut to size, you can install them. To do this, apply a bead of wood glue to the subfloor where the new planks will go. Then, place the new planks in place and tap them into place with a hammer. Be sure to use a tapping block to protect the planks from damage.

Step 4: Nail or Screw the Planks in Place

Once the planks are in place, you need to nail or screw them into place. Use a nail gun or a drill to do this. Be sure to use the correct size nails or screws.

Step 5: Sand and Finish the Planks

Once the planks are nailed or screwed in place, you need to sand them and finish them. To do this, use a sanding block to sand the planks until they are smooth. Then, apply a finish to the planks, such as polyurethane or varnish. Be sure to follow the manufacturer's instructions when applying the finish.