Fill Gaps In Wood Floor

Wood flooring is a beautiful and durable addition to any home, but over time, gaps can develop between the planks. These gaps can be caused by a variety of factors, including changes in humidity, temperature, and the natural movement of the wood. While small gaps are not typically a problem, larger gaps can allow dirt and debris to accumulate, which can damage the floor and make it more difficult to clean.

There are a few different ways to fill gaps in wood floors, depending on the size of the gap and the type of wood flooring you have. For small gaps, you can simply use a wood filler. Wood filler is a paste-like substance that is available in a variety of colors to match your flooring. To use wood filler, simply apply it to the gap with a putty knife and smooth it out. Once the wood filler has dried, you can sand it and stain it to match the rest of your floor.

For larger gaps, you may need to use a spline. A spline is a thin strip of wood that is inserted into the gap and then glued in place. To use a spline, first cut the spline to the length of the gap. Then, apply glue to the spline and insert it into the gap. Once the glue has dried, you can sand the spline flush with the rest of the floor.

If you have a floating wood floor, you may be able to simply replace the damaged plank. To do this, first remove the molding around the perimeter of the floor. Then, carefully pry up the damaged plank and remove it. Once the damaged plank is removed, you can install a new plank in its place. Be sure to glue the new plank in place and then replace the molding.

No matter which method you choose, it is important to fill gaps in wood floors as soon as possible to prevent further damage. By following these simple steps, you can keep your wood floor looking its best for years to come.

Additional Tips

Here are a few additional tips for filling gaps in wood floors:

Use a wood filler that is specifically designed for the type of wood flooring you have.
Apply wood filler to the gap with a putty knife and smooth it out.
Once the wood filler has dried, you can sand it and stain it to match the rest of your floor.
For larger gaps, you may need to use a spline.
If you have a floating wood floor, you may be able to simply replace the damaged plank.